Menu
  • Menu
  • By Patty Goff


    A radio antenna (or just aerial) is a transducer that can send and receive radio waves (electromagnetic waves) designed for radio, TV, cell phones, radar or satellite. A radio antenna is a transducer with a usable efficiency can perform one or both of these energy conversions: marketable alternating electrical energy for transmission of radio wave energy. Marketable radio wave energy to alternating electrical energy (military antennas).

    Within the transmission we can define co-polar diagram that represents the communication from to a desired polarity and polarized radiation pattern with the opposite polarity to that you already have. The most important parameters of the radiation pattern are: pointing direction: The maximum radiation. Directivity and Gain. Main lobe constitutes angular range around the direction of maximum radiation. Side lobes are other relative maxima, lower the principal value.

    A typical loop antenna is made of copper, in resonance with a variable capacitor when transmitting and can withstand high voltages. The transmission can take many amps and the voltage across the capacitor several kilovolts. Loops of copper are more effective than lower managers, due to the large flow. Loops are circular and more efficient than squares, an alternative is octagoner that are easier to manufacture.

    Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.

    The antenna resistance is the sum of the transmission resistance and loss resistance. The antennas are called resonant when its input reactance vanishes. Beam is a radiation parameter, linked to a radiation pattern. May define the beam width at -3 dB, which is angular range within which the radiated power density is equal to half of maximum power (in main direction of radiation).

    You can also define the beam width between zero, which is the angular range of the main beam of a radiation pattern between two adjacent zeros to maximum. Create antennas radiated electromagnetic fields. Polarized electromagnetic defined in a certain direction, as the geometric shape that traces the edge of electric field vector at a certain distance from the antenna, to change the time.

    Every day use of aerials to transmit and receive signals (data) throughout the world by millions of people is ordinary. General: Everything is connected without cables using in some degree antennas for the exchange of information (data). An aerial is a (metal wire) device designed for the purpose of emitting or receiving electromagnetic waves into free space. A transmitter antenna transforms electrical energy into electromagnetic waves, and a receiver performs the inverse function.

    If, in each of these ports, a diplexer, which separates the frequency bands of emission and reception, it will be a feeder four ports with a single antenna will be able to send and receive both polarizations simultaneously placed. At other times, these antennas have only two ports, one for emitting a polarization and the other to receive the opposite polarization.




    About the Author:



    0 comments:

    Post a Comment

     
    Top